Auto Roller Filter (Large) Gen 2 SK-5000 Automatic - ClariSea

The ClariSea fleece filter is a high efficiency water filtration system which effectively removes suspended particles such as micro algae, detritus, food, organic waste and gravel dust from the water column. Suitable for use in marine aquariums, freshwater aquariums, fish-breeding systems and propagation systems for corals. A ClariSea filter will completely replace the need for high maintenance filter socks and result in brilliantly clear water in your aquarium. The use of a ClariSea fleece filter will ensure the highest possible filtration efficiency for optimal light penetration and growth of your corals and plants. Continuously removes detritus & organic waste from the water column preventing breakdown to nitrate & phosphate in your aquarium. The ClariSea fleece filter dramatically reduces the load on your protein skimmer by removing even the smallest of particles. Constant filtration results in reduced maintenance of pumps, wave makers and protein skimmers, plus... no more socks to clean. A ClariSea fleece filter will noticeably reduce the accumulation of detritus in your aquarium substrate and sump.

Please view the CLARISEA INSTALLATION GUIDE

Dimensions:

L x W x H (w/o extension arm) = 10.03" x 8.85"x 18"

L x W x H (with extension arm) = 10.03" x 14.5" x 22.04"

Footprint = 5.7" x 10.03"

Features

High volume filtration capacity

Minimal installation footprint

Completely replaces the need for filter socks

Self-assembly for easy cleaning

Multiple installation options

Manual advance of fleece (upgradeable to automatic advance)

Phosphate free fleece material

Special low-odour fleece material

Integrated fail-safe overflow

Silencer plates for quiet operation

Water bypass system

Specifications

flow rate: up to 5,000 l/h (1320 US gph)

Particle size removal: down to 20 microns

Maximum submerged water depth: 20cm (8”)

Hang-on bracket height adjustment: up to 12cm (4”)

Maximum sump glass thickness for hang on bracket: 13mm (1/2")

Recommended aquarium size at 5 x tank turn over (5000l/hr) = 1000lt

Recommended aquarium size at 4 x tank turn over (5000l/hr) = 1250lt

Inlet connection: 32mm

Filter fleece: 15cm (6”) width – length 25m (82ft)

Mounting & Installation Options

The Gen2 ClariSea is very flexible and easy to position within your sump:

You can hang it on the back, front or sides of the most sumps.

You can freestand it on the base of a shallow sump with a water level below 200mm.

you can freestand it on a box or shelf in deeper sumps.

You can feed it from the front or from the back.

You can feed water from the top, side or at an angle.

You can even pump feed it.

Smart Controller Functions

Buttons & Functions

Motor button

• Manually advances fleece motor

Alarm button

Press alarm button for 1 - 2 seconds will turn off audible alarm, but alarm condition will still be present

Red LED still flashing

Automatic advance of fleece disabled.

Motor button will still function as manual advance.

Pressing the alarm button for > 5 seconds:-

Full reset - completely clearing alarm state

Disconnecting power: performs reset as above.

Normal Operation

Initialization (Power on or reset):

•Blue/Red LED both flash for 5 times (audible alarm will sound with each flash)

•Blue LED will remain on.

Motor Advance:

Manual or automatic, Blue LED flashes

Possible Alarm Conditions:

Possible roll jam/motor failure (float held in up position for more than 5 seconds)

•Red alarm LED will flash

•Audible alarm will sound for 2 seconds every 5 seconds

•Automatic advance of fleece disabled.

Possible fleece empty (float not triggered within 8 hours)

•Blue/Red LED both flashing, audible alarm will sound for 1 second every 2 seconds

•Automatic advance of fleece disabled.

Possible installation error (float not triggered with 48 hours)

•Red LED will flash at 10 second intervals (audible alarm will sound with each flash)

•Automatic advance of fleece disabled.